Ltd.«BLOCK STROY»

Produces high quality concrete blocks for building low-cost houses and warm. We also produce thermal insulation attic floor, pouring a mixture of foam concrete floors, a monolith.


FOAM BLOCKS

The price of concrete blocks mark D500 size 200x300x600

Concrete blocks dimensions
2800 rubles/м3


CONCRETE BLOCKS FROM THE MANUFACTURER

Started a building? From which to build a house? Construction of houses of foam blocks one of the best, fastest and cost-effective option, as the price of concrete blocks is lower than other construction materials. Moreover, the foam concrete blocks have properties such as reliability, low thermal conductivity, speed of installation, sound, efficiency, fire safety, environmental friendliness, the ability to produce a wide range of densities: D400, D500, D600, D700, D800, D900, D1000, D1200.

Foam blocks have the following properties:

 

If you choose foam concrete blocks for the construction of the house and you have questions:
Where to buy concrete blocks?
The price of the foam block?
Delivery foam blocks?

The company «Block Stroy» makes concrete blocks of Fiber Reinforced (fibropenobloki). We seek long-term, mutually beneficial cooperation and, first of all, we care about the quality of their products. Each foam block is a compulsory quality control and meets state standards.
Our company is selling and delivering foam blocks in Moscow and the Moscow region town: Stupino, Kashira, Necklace, Silver Ponds, Zhilevo, Mikhnevo, Barybino, Domodedovo, prominent, Lake, Bronnitsi, Kolomna, Resurrection, Luhovitsy, Podolsk, Klimovsk, Chekhov, Serpukhov , Pushchino, Venev and other cities.

Foam a building block, which is produced by pouring foam in the form of the desired size.

The structure of the foam block

Foam concrete - lightweight cellular concrete is obtained as a result of hardening solution consisting of cement, sand, water and foam. Foaming agent provides the necessary content and uniform distribution of air in the concrete. Foam concrete combines the advantages of stone and wood: strength, lightness, machinability and nailability and needs in combination with other building materials. It can be plaster, stud clapboard or other material, facade paints to paint in any color. Ability to obtain the desired proportion, given the strength needed termosoprotivlyaemost, the desired shape and volume make it attractive for the manufacture of a wide range of building products. This product can be used as structural and insulation material. From the viewpoint of durability of foam, unlike foams, mineral wool and lose their properties over time only improves its strength and insulating performance.

Reinforced foam

Reinforced concrete blocks (fibropenobloki) -is done by adding a fiberglass foam. As a result of mixing polypropylene fibers are uniformly distributed throughout the volume of the mixture and reinforced its all napravleniyam.Etot process to optimize the structure of fibropenobetona that helps to prevent the development of internal defects foam.

Advantages of fiber-reinforced foam block:

  • Increases resistance to mechanical impact foam
  • Increases resistance to abrasion
  • Increases the tensile strength of the foam on the flexural
  • Eliminates the appearance of plastic deformation, cracks, flaking surfaces
  • Increases frost foam
  • Increases water-resistant foam by blocking fiber fiber capillaries foam

What are the concrete blocks you need?

Depending on the use of foam concrete blocks and their conditions of use, the foam blocks are divided into a brand that is directly dependent on the density of the foam blocks, ie weighs as much as 1 m3/kg. The lower the density of the foam, the better its thermal insulation, the higher the density, the better the strength of the foam block. What would you choose foam block, you need to understand the purpose for which it is applied. For example, if you are going to build a multi-story house, you have to use a structural foam block D900-D1200, for low-rise building (cottage, house), heat-insulating structural foam blocks D600-D800, and for interior walls, insulation foam concrete blocks D400, D500. Foam concrete blocks still have the strength characteristics. Thus, the foam block stamps D500 can be as insulation and heat-insulating structural.

Depending on the density, are following brand foam:

Strength and thermal conductivity of the foam blocks

Marc density
foam
Strength
kg/cm2
Thermal conductivity
W/m*K
300 not specified 0,08
350 7,0 0,09
400 9,0 0,10
500 13,0 0,12
600 16,0 0,14
700 24,0 0,18
800 27,0 0,21
900 35,0 0,24
1000 50,0 0,29
1100 64,0 0,34
1200 90,0 0,38

Share with your friends a link to this site on social networks.